Skip to content Skip to navigation

Quick Guide to Video Control Console in Core A

by Hanz Makmur

Core 301 (a.k.a CoRE A) is equipped with a computer, a projector, and 2 TVs. You may use the podium computer to display your presentation or use your own laptop.  

On the podium computer, there is a simple Video Control Console App you can use to select a video source.   To use the AV system in the room, follow steps below:

  1.  Turn on the projector and TVs in the room. You will need to press the power button on the buttom-right side of each TV and press the power button on the projector Remote.
  2.  Select your Video input using the Video Control Console by following instruction below.

Using Video Control Console:

1. Click on Podium button if you want to display Podium screen on the projector and TVs in the room

2. Click Laptop button if you want to display your laptop screen and plug your laptop video out to the HDMI cable.  You can find this HDMI cable show on the right near the podium or on the floor.

If your laptop computer have no HDMI connector, there are all kind of adaptors available in a box by the podium shelf.  Please use one of these adaptors to display. Don't forget to return the adapter back in the box once you finished using it.

Note: At the end of your presentation, don't forget to turn off what ever devices you turned on.

If you need immediate assistant, please go to Core 213 or call 5-7056.  Otherwise, please send email to: